Shop
Showing 151–180 of 193 resultsSorted by latest
-
All products
1″ rubber muflex
Offers consistent protection against dust, dirt, vibration, sound and heat, as well as a long service life with the best possible performance
The fire-retardant sheet is lightweight and easy to cut to size, while the PU foam material offers optimum flexibility to be used across a wide range of applications
It has low emission characteristics, ensuring that it is safe for the user and the immediate environments the foam sheeting is being used in
SKU: 1RubMuflex -
Refrigerants, You may also like
R404A 10.9kg disposcan
Its main application is new plants for medium and low refrigeration temperatures. The theoretical cooling capacity is 5% lower than the R-502 at evaporation temperatures equal to -40ºC. The coefficient of performance (COP) is between about 5 and 8% less than with R-502. If overheating increases, the R-404A COP may be higher than that of R-502. In the case of the retrofits of R-502 and its HCFC substitutes (R-408A, DI-44), it is necessary to eliminate 95% of original mineral oil or alkylbenzene, replacing it with an oil based on polyol esters, change the dryer filter, expansion valve, rubber O-rings with plastic ones and in some cases oversize the condenser. If it is used as an R-22 retrofit, it will also be necessary to replace the safety valves and other calibrated elements according to the R-22 pressures.
APPLICATIONS
· average temperatures
· low temperatures
· New installations
· RetrofitFEATURES
· Does not damage the ozone layer, ODP = 0.
· Only compatible with POE type synthetic oils.
· It is possible to fill the devices in the event of leaks.
· Discharge temperatures lower than those of R-22, which prolongs the useful life of the compressor.
· Cooling capacity and energy efficiency slightly lower than those of R-502.
· Superior cooling capacity and energy efficiency similar to that of R-22.
· Global warming potential (GWP) = 3922
· Boiling point at 1.013 bar (ºC): -46.45
· Glide (temperature fluctuation) (ºC): 0.7
· Saturated vapor density at 25ºC (kg / m3): 63.28
· UN number: 3337
· Safety classification: A1. Low toxicity and non-flammable.
· Always load in liquid phaseSKU: R404A10.9kg -
All products, Overload Relay
1/3hp overload
1/3hpover
Fits various compressor brands.
Works on 1/3Hp Cap started compressors.
This Replacement Parts Are Made Of Durable High-Quality Materials ,Small In Size, Light In Weight And Reliable In Performance ;Way To Repair Repair The Refrigerator; The Normal State Of The Protector Is: The Sound Is Normal, And The Bimetal In The Protector Is Not Fixed requirement. It Is Very Convenient And Quick To Install, Avoid frequent maintenance or replacement of compressors. And Keeping The Food or Wine Fresh & Delicious.What’s in the box
1 x Thermal Overload ProtectorSKU: 1/3hpover -
-
All products
3/4HP R404 Single Phase Compressor
3/4HP R404 Single Phase Compressor
We provide advanced compressors, condensing units, flow control systems and electronic controls to protect food quality while enabling operators to maximize equipment uptime and increase energy efficiency.
Fractional and Integral Horse Power compressors provide perfect cooling, creating value for its users. The compressors are manufactured at a state-of-the-art India plant located at Atit, in Maharashtra. The performance of the compressors is optimized using Computer Aided Engineering facilities with the components being subjected to stringent Emerson qualification standards.SKU: 3/4 Hp R404 -
Accessories
50mf Capacitors
Parallel capacitor with an aluminium casing for fluorescent lamps (T,TC) and discharge lamps (HS, HI, HM) 250V, 50/60Hz. Type A.
Type A Capacitors with an Aluminium Casing – 250 V.
For HS/HI/HM/LS Discharge Lamps.
Type: 41053
Capacity: 50 mF
Dimension / Lenght mm: 45/135
Mounting: M8 × 10 bolt
Filled / Dry: Dry
Terminal: Push-in terminal
Thermal fuse: –
Approval mark: II
Technical Details of Vossloh-Schwabe Parallel Capacitors
All VS Capacitors comply with IEC 61048 A2 (Safety) and IEC 61049 (Operation). Capacitors rated 250 V and 280 V also bear the ENEC mark.
Nominal voltage
• 250 V, 50 – 60 Hz ;
• 280 V, 50 – 60 Hz ;
• 450 V, 50 – 60 Hz (dependent on type)
Capacitance tolerance: ±10% ; ±5%
Temperature range: –40…+85 °C
Relative humidity load:
• Class F for Type B capacitors
• 75% annual mean
• 95% peak value on 30 days
• Class G for Type A capacitors
• 65% annual mean
• 85% peak value on 30 days
Capacitors must not be subjected to condensation
Failure rates it maximum voltage, current and temperature values are complied with = 1 ‰ per 1000 operating hours
Permissible torque on the base screw:
• M8 × 10 – 5 Nm (aluminium casing)
• M8 × 10 – 2.2 Nm (plastic casing)
Split fixing pins with a clearance of 20 mm for plastic casings (side clip)
Optional thermal fuse (Type A capacitors)
Connecting wires:
Parallel capacitors for fluorescent Lamps
• Casing diameter 25 – 30 mm: 0.5 – 1 mm² and IDC terminals for H05 V-U 0.5 conductors
• Casing diameter > 30 mm: 0.5 – 1 mm² parallel capacitors for high-pressure lamps
Casing diameter 25 – 30 mm: 0,5 – 1 mm² and IDC terminals for H05 V-U 0.5 conductors
Casing diameter > 30 mm: 0.5 – 1.5 mm²SKU: 50 mf capacitor -
Fan Motors and Blades
25W Fan Motor
The new range of shaded pole motors is the result of more than 50 years experience of ELCO as world leader not only for the sales volumes, but also for know-how, research and development.
ELCO is today the only manufacturer offering a 3 years warranty on its shaded pole motors. All products are strongly innovative as ELCO wants to answer the request of the market asking for new technologies.axial fan motor
rated power 25 W
power supply 230/240 V
electricity 0,68 A
power input 95 W
RPM 1300/1550 r/minSKU: 25W FAN -
All products
Glass 5/8″ (Solder)(Castel)
Maximal working pressure: up to 46 bar.
Multi- fluids (G1 or G2).
The large size of the glass and the absence of a central hygroscopic tip ensure excellent visibility.
The moisture indicator fastening system ensures protection against erosion and prevents fouling by oils and dirts present in the circuit; it also eliminates any turbulence that would hinder proper vision of the refrigerant and does not lead to any pressure drop.
The sealed design and the seaming principle of the chosen glass ensure perfect air-tightness.
Two very thick hexagon head bolts facilitate sight glasses positioning and handling for tightening of connections to screw.
The male/female sight glasses to screw are delivered with a guided copper gasket on the female side (except for the VCYL 25 which has a non-guided gasket), which enables a quick and reliable positioning.
The male/female sight glasses to screw can be screwed directly at the outlet of the filter drier.
The low weight of the VCYL sight glasses requires no specific binding.SKU: 5/8SighGlasSo -
All products, You may also like
Glass 5/8″ (Flare)(Castel)
The function of the sight glass is to observe the liquid level of the refrigerant and detect the presence of moisture in the back end of the dry filter in the system. In a system with an expansion valve, a sight glass is usually fitted in the liquid line immediately after the filter drier.
SKU: 5/8SighGlassFl
